Temperature Mapping Portal

This portal is used for secure Sci-Tek temperature mapping jobs.

If Sci-Tek has sent you a mapping link, please open that link from your email. Each job link contains the secure details needed to open the placement form.

For assistance, contact Sci-Tek Systems at service@sci-tek.au or (02) 4229 3184.

Loading mapping...

0% complete

Logger placement training

Read this before you place any loggers. It takes about 10 minutes, then there's a short check. Sci-Tek keeps a record that you completed it.

Knowledge check

Answer every question. You need all of them right to continue. If you get one wrong you'll see why, and you can try again.

Show your logger list

Your details

You must be the person placing the loggers. These details go on Sci-Tek's training record and the mapping report.

Client / siteUnitFull nameEmailRoleEmployer

I completed Sci-Tek's logger placement training above, passed the check and understood it.Sign by typing your full name

Place and scan the loggers

Place each logger in its marked position with its lagging, then scan its QR code and tick it.

Date and time placed

Installation evidence

Cabinet overview

Stand directly in front of the unit with the door fully open. Every logger must be visible.

Photo required

5G modem

Show the modem with the USB stick fitted and powered on. The status light must be visible.

Photo required

Modem location

Notes and deviations from the plan

Review and sign off

I placed the loggers as recorded above, following Sci-Tek's training and logger location plan. I will leave the loggers and modem undisturbed until Sci-Tek confirms the mapping has finished, and I'll tell Sci-Tek straight away if anything is moved.

The mapping starts only after Sci-Tek has checked this placement and emailed you to confirm.

Sign by typing your full name